Instruction to use:
- Very easy to use: just stir this syrup with 1 L of warm distilled water in a suitable glass or plastic container.
- Place in the container a rhodium coated anode and connect it to a POSITIVE power supply.
- Connect an object to be plated by copper or aluminium wire to a NEGATIVE power supply and deep this object in same container UNDER top level of solution.
- Apply 10-15V DC for 30-60 seconds.
- Amperage range 1.5 - 2.0 Adc PSI.
- Desired distance between anode and plating object: 1"-2" (25-50 mm).
- After plating process rinse the plated object in warm rinsing water.
- Dry.
- Polish.
Useful tips for beginners:
- Reusable.
- Shelf life - 2 years in a dark, cold place.
- If you want to strip coated rhodium - change polarity of power supply.
- To get a good result you MUST to clean all metal objects BEFORE start to plate them by Rhodium.
- Please remember that anode MUST be twice bigger then area of plating.You can find some standard anodes THERE or just contact us regarding what are you looking for.
- Power suppliers can be found THERE.
This chemical is NO harmful.