THIS AUCTION IS ABOUT ONE, HIGH QUALITY CUBE GRAPHITE MOLD/MOULD FOR 7 OF 1-OZ (31 G OF PURE GOLD) DIFFERENT INGOTS: TWO TRADITIONAL BARS (BIG & SMALL), "COIN" , 8-MM ROUND BAR, SQUARE TABLET WITH ROUND CORNERS, 1" TRIANGLE & A "RING". THIS GRAPHITE MOLD/MOULD IS FULLY SUITABLE ALSO TO PRODUCE ALL THESE SEVEN INGOTS FROM ANY OTHER TYPE OF METAL. YOU CAN ALSO TO RE-USE THESE MOLD/MOULD USING GRAPHITE PROTECTOR PAINT (SUPPLIED) AND DEPENDING OF YOUR TOOLS, TEMPERATURES, HEATING TIME, TYPE OF METAL AND YOUR EXPERIENCE.
CUSTOM MADE MOLDS/MOULDS AND OTHER 6-IN-1 AND 7-IN-1 (LEAFS, COINS ETC) MOLDS/MOULDS ALSO AVAILABLE ON REQUEST.
PLEASE NOTE: this picture above shows the same graphite mold/mould from different angles.
Technical Specification:
Dimensions of cube: 37 mm (1.1/2") x 37 mm(1,1/2") x 37 mm (1,1/2")
- Precision = "+10%G".
- Shape of walls (ingot's) - "L" (square).
- Maximum heating temperature = 1240 C (2264 F).
- Dimensions of round mold/mould: 25.4 mm (1") D x 3 mm (3/32") deep.
- Dimensions of round bar mold/mould: 10 mm diameter (3/8") x 20 mm (13/16") deep.
- Dimensions of "ring" mold/mould: 18 mm diameter (3/4") x 8 mm (5/16") deep. 9 mm (3/8") bore.
- Dimensions of standard traditional bar mold/mould: 25.4 mm (1") W x 12.7 mm (1/2") x 6 mm (1/4") deep.
- Dimensions of small traditional bar mold/mould: 25.4 mm (1") W x 6 mm (1/4") x 6 mm (1/4") deep.
- Dimensions of square tablet mold/mould: 25.4 mm (1") W x 25.4 mm (1") x 4 mm (1/8") deep.
- Dimensions of triangle mold/mould: 22 mm (7/8") x 22 mm (7/8") x 22 mm (7/8") x 6 mm (1/4") deep.
DELIVERY SPECIFICATION:
- This 7-IN-1 graphite mold/mould with 7 different 1-OZ ingots.
- Heat-resist muffle stand for this ingot.
- Graphite protector paint (25 ml pot) for helping to release ingot from the mold/mould.
- Brush for this paint.
