THIS IS A "ROBOTIC", COMMERCIAL GRADED, PROFESSIONAL, PROGRAMMABLE SMART KILN WITH REMOTE CONTROL, AUTOMATIC OPEN-CLOSE DOOR, HEAVY DUTY METAL STAND AND WITH AN EMERGENCY SWITCH FOR ADDITIONAL USER'S SAFETY. THIS KILN CAN BE UPGRADED ON REQUEST IN FUTURE WITH A LASER-BASED FORCED AIR EXTRACTION SYSTEM AND/OR A PC CAMERA WITH IR-FILTERS. THIS KILN HAS ALSO A FULLY PROGRAMMABLE (TEMPERATURE/TIME) AND CALIBRATED 32-SEGMENTS (STEPS) DIGITAL TEMPERATURE MICROPROCESSOR THAT WILL ALLOW YOU TO REGULATE HEATING AND COOLING SPEED AS WELL AS SOAKING TIME. IT'LL ALLOWS YOU ALSO TO WORK WITH MOST TYPES OF MATERIALS SUCH AS METALS, CLAYS, PMC, GLASS (FUSING AND ANNEALING), ENAMELS, PLASTICS, COMPOSITION MATERIAL, GLAZING, SOME CERAMICS, PORCELAIN ETC WHERE ACCURACY TEMPERATURES, CONTINUOUSLY HEATING TIME AND/OR AUTOMATIC CONTROLLED HEATING OPTIONS ARE CRITICAL. IMPORTANT: THIS KILN HAS ALSO A DIGITAL, OVER/LOW-TEMPERATURE REGULATION SECURE SYSTEM TO HOLD SAME TEMPERATURE DURING THE WHOLE SOAKING PROCESS AND AN INTERNAL SMOOTHING CIRCUIT DIGITAL GUARD FOR ACCURATE READING AND STABILITY WORK OF THE PROGRAMMABLE CONTROLLER ON FLUCTUATIONS OF ELECTRICITY THAT IS VERY IMPORTANT OPTION FOR MOST GLASS, CERAMIC, GLAZING AND POTTERY FIRING PROCESSES. PLEASE FIND MORE INFORMATION ABOUT THIS SMART KILN BELOW:
AN INSTRUCTION MANUAL ON THIS KILN IS AVAILABLE THERE
- 220 VAC version with EU/RUSSIA standard electrical plug (two round pins + E).
- 240 VAC version with UK/IRELAND standard electrical plug (three square pins).
- 240 VAC version with a standard AU/NZ electrical plug adapter (three flat pins).
- Model: SK-1200.- Brand: Technical Supermarket (London).- Grade: Commercial.- Power: 3600 Watt on 1200 C.- Single phase, 16A plug/fuse;- Maximum heating temperature – 1200oC (2192oF).- Heating time to 1200 C = 90 minutes.- Maximal soaking time: on 1200 C = 10 minutes. On temperatures below 1000 C = 8 hours.- Fully calibrated on 5 points: 200C; 550C; 820C; 1100C and 1180C.- Estimated useful chamber's dimensions: 15” x 7” x 7”H (400 mm x 200 mm x 200 mm(H)).- Kiln's outer dimensions: 850 (L) x 500 (H) x 400 mm;- Box dimensions: 800 x 600 x 500 mm high;- Pallet dimensions: 800
x 1000 x 700 mm high;- Minimal time setting point = 1 Minute.- Minimal Temperature setting point = 1o
Celsius (0.1C is available on request).- - Programmer with 32 temperature/time segments/points.- CE approved: meets all Europe/US electrical standards.- SSR (Solid State Relay) for accuracy control of temperatures (+/- 1 C).- NO ASBESTOS at all. MSDS on insulation material is available on request.- Two of 18-mm (3/4") ventilation holes on the door with stainless steel shutters?- Will be deliver to you with a heavy duty metal stand + plastic feet.- Has remote control (set of two transmitters) that will disconnect the microprocessor of this kiln from its power supply for avoiding unauthorized use.- For your additional safety this kiln has an emergency secure switch on the front panel of electrical box for disconnecting heating element/s from its power supply if required.- Position of four heating elements - TOP.- K-type industrial thermocouple.- Three meter mains cable.- Possibility to cancel all
programs at one click (clean up the microprocessor’s memory for a new programs).- Possibility to jump from one
program to an other program or inside one program between point/segment.- Possibility to abort any
program at any time on any temperature point.- Possibility to hold work on a
present temperature as long as you need.- Possibility to use this temperature programmator as a simple PID controller.- Possibility to track each heating process and to save all programs on a PC/Laptop if you have a software, dongle and RS485-USB adaptor (supplied separately).- Need
your own program? Send to us the required temperatures/time setting and we will programming
this microprocessor for you free of charge and send it to you ready-to-use kiln. - IMPORTANT: Free-for-first-year re-setting of the microprocessor for your new projects (new programs) - on-line or via email: use this service as often as you like without any restriction.- Forced, laser-based air extraction system, heat resist IFR camera and/or PC/Laptop RS-485-USB adapter with PC soft (for connecting your kiln to a PC/Laptop) are available for an additional charge on request.- Will be delivered in a wooden box.- Two years full manufacturer warranty.- All after-warranty services worldwide include parts-by-post.- Made in UK (London)- Weight - 49 kg (65 kg in wooden box).
Attention: You'll require a screw-driver and basic technical knowledge for fixing to this kiln its electrical box, arm and few other items.
Delivery specification: - The SK-1200-18 kiln;- Two transmitters for remote control;- Two year manufacturer warranty;- Heavy duty metal stand.- Skype Free-for-one-year online technical support include re-setting (programming);- Downloadable User manuals by email.
keep the best postage prices & services for all our customers and
you will be able to see and choose anything you like BEFORE confirming
your order on checkout. If you do not like these prices
(services) please let us know if you know how to deliver your order to
you quicker or cheaper and we will be glad to assist.
MORE QUESTIONS? PLEASE USE A CUSTOMER SERVICE FREEPHONE: +44 (0)800 059 9607 (Working hours: 8.00 - 16.00 BST (London)) OR JUST SEND TO US AN EMAIL (24/7): [email protected]
Spotted an error? Please let us know